Mean Well 50W 1050mA Single Output LED Power Supply Driver from China manufacturer

Mean Well 50W 1050mA Single Output LED Power Supply Driver

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: LPC-60-1050

Brand Name: Mean Well

Constant current design
Universal AC input / Full range
Fully encapsulated with IP67 level
Withstand 300VAC surge input for 5 seconds

Mean Well 50W 1050mA Single Output LED Power Supply Driver LPC-60-1050 Constant current design IP67 drivers CE UL approved

MODEL		LPC-60-1050	LPC-60-1400	LPC-60-1750
OUTPUT	DC VOLTAGE	9 ~ 48V	9 ~ 42V	9 ~ 34V
	CONSTANT CURRENT OPERATION VOLTAGE Note7
	CURRENT RANGE
	RATED CURRENT	1050mA	1400mA	1750mA
	RATED POWER	50.4W	58.8W	59.5W
	RIPPLE & NOISE (max.) Note.2	200mVp-p	200mVp-p	200mVp-p
	VOLTAGE ADJ. RANGE
	CURRENT ADJ. RANGE
	VOLTAGE TOLERANCE Note.3	5.0%
	LINE REGULATION	1.0%
	LOAD REGULATION	2.0%
	SETUP, RISE TIME	500ms, 120ms / 230VAC 500ms, 120ms / 115VAC at full load
	HOLD UP TIME (Typ.)	50ms/230VAC 16ms/115VAC at full load
INPUT	VOLTAGE RANGE	90 ~ 264VAC 127 ~ 370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	POWER FACTOR
	EFFICIENCY (Typ.)	87%	85%	87%
	AC CURRENT (Typ.)	1.2A/115VAC 0.7A/230VAC
	INRUSH CURRENT (Typ.)	COLD START 30A/115VAC 60A/230VAC
	LEAKAGE CURRENT	0.25mA / 240VAC
PROTECTION	CURRENT LIMIT	5% rated output current
		Protection type : Constant current limiting type
	SHORT CIRCUIT	Hiccup mode, recovers automatically after fault condition is removed
	OVER VOLTAGE	50.4 ~ 60V	44.1 ~ 56.7V	39.1 ~ 45.9V
		Protection type : Shut off o/p voltage, clamping by zener diode
	OVER TEMPERATURE

ENVIRONMENT	WORKING TEMP.	-30 ~ +70 (Refer to output load derating curve)
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-40 ~ +80 , 10 ~ 95% RH
	TEMP. COEFFICIENT	0.03%/ (0 ~ 50 )
	VIBRATION	10 ~ 500Hz, 2G 12min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY &EMC(Note 4)	SAFETY STANDARDS	UL1310 Class 2, CAN/CSA C22.2 No. 223-M91(for LPC-60-1750 only), IP67 approved ; design refer to TUV EN60950-1, EN61347-2-13
	WITHSTAND VOLTAGE	I/P-O/P:3KVAC
	ISOLATION RESISTANCE	I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH
	EMI CONDUCTION & RADIATION	Compliance to EN55022 (CISPR22) Class B
	HARMONIC CURRENT	Compliance to EN61000-3-2 Class A, EN61000-3-3
	EMS IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A
OTHERS	MTBF	732Khrs min. MIL-HDBK-217F (25 )
	DIMENSION	162.542.532mm (LWH)
	PACKING	0.4Kg; 32pcs/13.8Kg/0.56CUFT